IO-2050 OBD-II Tracker
With the ability to transmit over cellular as well as WiFi and Bluetooth you can rest assured no matter where your fleet travels. The compact design allows it to connect directly to the OBD-II port found in light-duty vehicles, but can also be used with an adapter for J1939 or J1708 ports.
KEY SPECIFICATIONS
- Built-in SAE J1962 Type B 16-pin connector supporting 12V and 24V vehicles
- 3-axis accelerometer & 3-axis gyroscope
- WiFi 801.11b/g/n up to 150Mbps and simultaneous AP and Station modes
- Bluetooth 4.2 Class 1 supporting BR/EDR and LE dual-mode
- LTE Category M1, NB-IoT, and GPRS/2G cellular modem with built-in high-gain antennas
- nanoSIM slot or eSIM built-in
- Multi-constellation GNSS receiver with built-in high-gain antenna
Price includes 12 months of SIM service for evaluation, SIM service can be renewed thereafter for $24 per unit per year.
For international orders, please contact sales@iosix.com.
SKU: IOS-2050
- WiFi 801.11b/g/n up to 150Mbps and simultaneous AP and Station modes
- Bluetooth 4.2 Class 1 supporting BR/EDR and LE dual-mode
- LTE Category M1, NB-IoT, and GPRS/2G cellular modem with built-in high-gain antennas
- nanoSIM slot or eSIM built-in
- Multi-constellation GNSS receiver with built-in high-gain antenna
- High-efficiency switching power supplies for low temperature operation
- Over-, under-, and reverse-voltage protection exceeding automotive standards
- ESD protection exceeding automotive standards
- Full-color RGB LED for status indication
- Dual-core 32-bit Tensilica processor at 240MHz
- 3-axis accelerometer
- 3-axis gyroscope
- Built-in SAE J1962 Type B 16-pin connector supporting 12V and 24V vehicles
- Physical layer and protocol auto-detection/auto-bauding
- 3x Dual-wire CAN interface supporting 1Mbps (up to 5 optional)
- Single-wire CAN (GMLAN) interface
- Dual-wire J1708 interface
- ISO 9141 and ISO 14230 (KWP) interface and protocol support
- SAE J1850 VPW and PWM interface and protocol support
- J1939 protocol support
- ISO 15765 and ISO 14229 (OBD-II) protocol support
- J1587 protocol support
- Built-in flash memory
- Support for IOSiX ELD APIs for Android and iOS
- Support for IOSiX Advanced Vehicle Parameter Database
- Support for IOSiX Cloud Data Forwarding
- FCC/IC (US/Canada and other countries)
CE (Europe and other regions)
RCM (Australia/New Zealand) - Temperature range: -40 to +125 C
- Material: Polycarbonate
- Dimensions: 43x26x24mm
- Mass: 25g
With the ELD feature enabled, the IOSiX OBD-II Tracker can function as an ELD as well as a Tracker. The ELD functionality operates independently from the recording and transmission of GPS tracking data and requires a Bluetooth connection to a compatible ELD mobile app. For more information on this use case reach out to us at sales@iosix.com
