IO-2055 OBD-II Tracker (Remote)
A remote installation of the award-winning IO-2050 OBD-II tracker for privacy, security and special outfitting requirements. Can be connected to either a J1962 16-pin DLC or a J1939 9-pin using the proper cable configuration.
KEY SPECIFICATIONS
- 12-pin Molex connector supporting a wide range of 12V vehicles (24V coming soon)
- 3-axis accelerometer & 3-axis gyroscope
- WiFi 801.11b/g/n up to 150Mbps and simultaneous AP and Station modes
- Bluetooth 4.2 Class 1 supporting BR/EDR and LE dual-mode
- LTE Category M1 and NB-IoT cellular modem with built-in high-gain antennas (Cat 1 coming soon)
- eSIM built-in
- Multi-constellation GNSS receiver with built-in high-gain antenna
Price does not include SIM service which is $2/month per device.
For international orders, please contact sales@iosix.com.
IMPORTANT: IO-2055 requires purchase of either IO-0910 (OBD-II/J1962) or IO-0960 (9-Pin /J1939) cable to properly connect to the vehicle diagnostic data port. See below to add to cart.
Part #: IO-2055
- WiFi 801.11b/g/n up to 150Mbps and simultaneous AP and Station modes
- Bluetooth 4.2 Class 1 supporting BR/EDR and LE dual-mode
- LTE Category M1 and NB-IoT cellular modem with built-in high-gain antennas
- eSIM built-in
- Multi-constellation GNSS receiver with built-in high-gain antenna
- High-efficiency switching power supplies for low temperature operation (coming soon)
- Over-, under-, and reverse-voltage protection exceeding automotive standards
- ESD protection exceeding automotive standards
- Full-color RGB LED for status indication
- Dual-core 32-bit Tensilica processor at 240MHz
- 3-axis accelerometer
- 3-axis gyroscope
- 12-pin Molex connector supporting a wide range of 12V vehicles (24V coming soon)
- Physical layer and protocol auto-detection/auto-bauding
- 3x Dual-wire CAN interface supporting 1Mbps
- ISO 9141 and ISO 14230 (KWP) interface and protocol support
- J1939 protocol support
- ISO 15765 and ISO 14229 (OBD-II) protocol support
- J1587 protocol support
- Built-in flash memory
- Support for IOSiX ELD APIs for Android and iOS
- Support for IOSiX Advanced Vehicle Parameter Database
- Support for IOSiX Cloud Data Forwarding
- FCC/IC (US/Canada and other countries)
CE (Europe and other regions)
RCM (Australia/New Zealand) - Temperature range: -40 to +125 C
- Material: Polycarbonate
- Dimensions: 21x82x108mm
- Mass: 71g
With the ELD feature enabled, the IOSiX OBD-II Tracker can function as an ELD as well as a Tracker. The ELD functionality operates independently from the recording and transmission of GPS tracking data and requires a Bluetooth connection to a compatible ELD mobile app. For more information on this use case reach out to us at sales@iosix.com
